Showing:

Annotations
Attributes
Diagrams
Instances
Properties
Source
Used by
Included schema units.xsd
Namespace http://www.standardit.tapio.fi/schemas/forestData/workingSiteTradeEnvelope
Annotations
Builds on gmlBase.xsd to encode units of measure (or uom), including definitions of units of measure and dictionaries of such definitions. GML 3.0 candidate schema, primary editor: Arliss Whiteside. Parts of this schema are based on Subclause 6.5.7 of ISO/CD 19103 Geographic information - Conceptual schema language, on Subclause A.5.2.2.3 of ISO/CD 19118 Geographic information - Encoding, and on most of OpenGIS Recommendation Paper OGC 02-007r4 Units of Measure Use and Definition Recommendations. GML is an OGC Standard. Copyright (c) 2001,2005,2010 Open Geospatial Consortium. To obtain additional rights of use, visit http://www.opengeospatial.org/legal/ .
Properties
attribute form default: unqualified
element form default: qualified
version: 3.1.1.2
Element gml:unitOfMeasure
Namespace http://www.opengis.net/gml
Diagram
Diagram index13.tmp#id2032 index13.tmp#id2031
Type gml:UnitOfMeasureType
Properties
content: complex
Used by
Model
Attributes
QName Type Fixed Default Use Annotation
uom anyURI required
Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.
Source
<element name="unitOfMeasure" type="gml:UnitOfMeasureType"/>
Element gml:UnitDefinition
Namespace http://www.opengis.net/gml
Diagram
Diagram index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index1.tmp#id510 index1.tmp#id509 index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index19.tmp#id2039 index13.tmp#id2040 index13.tmp#id2041 index13.tmp#id2038 index13.tmp#id2034 index13.tmp#id2036 index13.tmp#id2035 index19.tmp#id2037
Type gml:UnitDefinitionType
Type hierarchy
Properties
content: complex
Substitution Group
Substitution Group Affiliation
Model gml:metaDataProperty* , gml:description{0,1} , gml:name+ , gml:quantityType , gml:catalogSymbol{0,1}
Children gml:catalogSymbol, gml:description, gml:metaDataProperty, gml:name, gml:quantityType
Instance
<gml:UnitDefinition gml:id="">
  <gml:metaDataProperty about="" xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">{0,unbounded}</gml:metaDataProperty>
  <gml:description xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">{0,1}</gml:description>
  <gml:name codeSpace="">{1,unbounded}</gml:name>
</gml:UnitDefinition>
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
Source
<element name="UnitDefinition" type="gml:UnitDefinitionType" substitutionGroup="gml:Definition"/>
Element gml:quantityType
Namespace http://www.opengis.net/gml
Annotations
Informal description of the phenomenon or type of quantity that is measured or observed. For example, "length", "angle", "time", "pressure", or "temperature". When the quantity is the result of an observation or measurement, this term is known as Observable Type or Measurand.
Diagram
Diagram index1.tmp#id513 index1.tmp#id532
Type gml:StringOrRefType
Properties
content: complex
Used by
Attributes
QName Type Fixed Default Use Annotation
gml:remoteSchema anyURI optional
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
xlink:actuate xlink:actuateType optional
xlink:arcrole xlink:arcroleType optional
xlink:href xlink:hrefType optional
xlink:role xlink:roleType optional
xlink:show xlink:showType optional
xlink:title xlink:titleAttrType optional
xlink:type xlink:typeType simple optional
Source
<element name="quantityType" type="gml:StringOrRefType">
  <annotation>
    <documentation>Informal description of the phenomenon or type of quantity that is measured or observed. For example, "length", "angle", "time", "pressure", or "temperature". When the quantity is the result of an observation or measurement, this term is known as Observable Type or Measurand.</documentation>
  </annotation>
</element>
Element gml:catalogSymbol
Namespace http://www.opengis.net/gml
Annotations
For global understanding of a unit of measure, it is often possible to reference an item in a catalog of units, using a symbol in that catalog. The "codeSpace" attribute in "CodeType" identifies a namespace for the catalog symbol value, and might reference the catalog. The "string" value in "CodeType" contains the value of a symbol that is unique within this catalog namespace. This symbol often appears explicitly in the catalog, but it could be a combination of symbols using a specified algebra of units. For example, the symbol "cm" might indicate that it is the "m" symbol combined with the "c" prefix.
Diagram
Diagram index26.tmp#id544 index26.tmp#id543
Type gml:CodeType
Properties
content: complex
Used by
Attributes
QName Type Fixed Default Use Annotation
codeSpace anyURI optional
Source
<element name="catalogSymbol" type="gml:CodeType">
  <annotation>
    <documentation>For global understanding of a unit of measure, it is often possible to reference an item in a catalog of units, using a symbol in that catalog. The "codeSpace" attribute in "CodeType" identifies a namespace for the catalog symbol value, and might reference the catalog. The "string" value in "CodeType" contains the value of a symbol that is unique within this catalog namespace. This symbol often appears explicitly in the catalog, but it could be a combination of symbols using a specified algebra of units. For example, the symbol "cm" might indicate that it is the "m" symbol combined with the "c" prefix.</documentation>
  </annotation>
</element>
Element gml:BaseUnit
Namespace http://www.opengis.net/gml
Diagram
Diagram index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index1.tmp#id510 index1.tmp#id509 index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index19.tmp#id2039 index13.tmp#id2040 index13.tmp#id2041 index13.tmp#id2038 index13.tmp#id2043 index13.tmp#id2042 index13.tmp#id2033
Type gml:BaseUnitType
Type hierarchy
Properties
content: complex
Substitution Group Affiliation
Model gml:metaDataProperty* , gml:description{0,1} , gml:name+ , gml:quantityType , gml:catalogSymbol{0,1} , gml:unitsSystem
Children gml:catalogSymbol, gml:description, gml:metaDataProperty, gml:name, gml:quantityType, gml:unitsSystem
Instance
<gml:BaseUnit gml:id="">
  <gml:metaDataProperty about="" xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">{0,unbounded}</gml:metaDataProperty>
  <gml:description xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">{0,1}</gml:description>
  <gml:name codeSpace="">{1,unbounded}</gml:name>
</gml:BaseUnit>
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
Source
<element name="BaseUnit" type="gml:BaseUnitType" substitutionGroup="gml:UnitDefinition"/>
Element gml:BaseUnitType / gml:unitsSystem
Namespace http://www.opengis.net/gml
Diagram
Diagram index1.tmp#id513 index1.tmp#id2044
Type gml:ReferenceType
Properties
content: complex
Model
Attributes
QName Type Fixed Default Use Annotation
gml:remoteSchema anyURI optional
Reference to an XML Schema fragment that specifies the content model of the propertys value. This is in conformance with the XML Schema Section 4.14 Referencing Schemas from Elsewhere.
xlink:actuate xlink:actuateType optional
xlink:arcrole xlink:arcroleType optional
xlink:href xlink:hrefType optional
xlink:role xlink:roleType optional
xlink:show xlink:showType optional
xlink:title xlink:titleAttrType optional
xlink:type xlink:typeType simple optional
Source
<element name="unitsSystem" type="gml:ReferenceType"/>
Element gml:DerivedUnit
Namespace http://www.opengis.net/gml
Diagram
Diagram index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index1.tmp#id510 index1.tmp#id509 index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index19.tmp#id2039 index13.tmp#id2040 index13.tmp#id2041 index13.tmp#id2038 index13.tmp#id2046 index13.tmp#id2045 index13.tmp#id2033
Type gml:DerivedUnitType
Type hierarchy
Properties
content: complex
Substitution Group Affiliation
Model gml:metaDataProperty* , gml:description{0,1} , gml:name+ , gml:quantityType , gml:catalogSymbol{0,1} , gml:derivationUnitTerm+
Children gml:catalogSymbol, gml:derivationUnitTerm, gml:description, gml:metaDataProperty, gml:name, gml:quantityType
Instance
<gml:DerivedUnit gml:id="">
  <gml:metaDataProperty about="" xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">{0,unbounded}</gml:metaDataProperty>
  <gml:description xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">{0,1}</gml:description>
  <gml:name codeSpace="">{1,unbounded}</gml:name>
</gml:DerivedUnit>
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
Source
<element name="DerivedUnit" type="gml:DerivedUnitType" substitutionGroup="gml:UnitDefinition"/>
Element gml:derivationUnitTerm
Namespace http://www.opengis.net/gml
Diagram
Diagram index13.tmp#id2032 index13.tmp#id2031 index13.tmp#id2048 index13.tmp#id2047
Type gml:DerivationUnitTermType
Type hierarchy
Properties
content: complex
Used by
Model
Attributes
QName Type Fixed Default Use Annotation
exponent integer optional
uom anyURI required
Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.
Source
<element name="derivationUnitTerm" type="gml:DerivationUnitTermType"/>
Element gml:ConventionalUnit
Namespace http://www.opengis.net/gml
Diagram
Diagram index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index1.tmp#id510 index1.tmp#id509 index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index19.tmp#id2039 index13.tmp#id2040 index13.tmp#id2041 index13.tmp#id2038 index13.tmp#id2050 index13.tmp#id2059 index13.tmp#id2046 index13.tmp#id2049 index13.tmp#id2033
Type gml:ConventionalUnitType
Type hierarchy
Properties
content: complex
Substitution Group Affiliation
Model gml:metaDataProperty* , gml:description{0,1} , gml:name+ , gml:quantityType , gml:catalogSymbol{0,1} , (gml:conversionToPreferredUnit | gml:roughConversionToPreferredUnit) , gml:derivationUnitTerm*
Children gml:catalogSymbol, gml:conversionToPreferredUnit, gml:derivationUnitTerm, gml:description, gml:metaDataProperty, gml:name, gml:quantityType, gml:roughConversionToPreferredUnit
Instance
<gml:ConventionalUnit gml:id="">
  <gml:metaDataProperty about="" xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">{0,unbounded}</gml:metaDataProperty>
  <gml:description xlink:actuate="" xlink:arcrole="" xlink:href="" gml:remoteSchema="" xlink:role="" xlink:show="" xlink:title="" xlink:type="simple">{0,1}</gml:description>
  <gml:name codeSpace="">{1,unbounded}</gml:name>
</gml:ConventionalUnit>
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
Source
<element name="ConventionalUnit" type="gml:ConventionalUnitType" substitutionGroup="gml:UnitDefinition"/>
Element gml:conversionToPreferredUnit
Namespace http://www.opengis.net/gml
Annotations
This element is included when this unit has an accurate conversion to the preferred unit for this quantity type.
Diagram
Diagram index13.tmp#id2032 index13.tmp#id2031 index13.tmp#id2052 index13.tmp#id2053 index13.tmp#id2051
Type gml:ConversionToPreferredUnitType
Type hierarchy
Properties
content: complex
Used by
Model gml:factor | gml:formula
Children gml:factor, gml:formula
Instance
<gml:conversionToPreferredUnit uom="">
  <gml:factor>{1,1}</gml:factor>
  <gml:formula>{1,1}</gml:formula>
</gml:conversionToPreferredUnit>
Attributes
QName Type Fixed Default Use Annotation
uom anyURI required
Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.
Source
<element name="conversionToPreferredUnit" type="gml:ConversionToPreferredUnitType">
  <annotation>
    <documentation>This element is included when this unit has an accurate conversion to the preferred unit for this quantity type.</documentation>
  </annotation>
</element>
Element gml:ConversionToPreferredUnitType / gml:factor
Namespace http://www.opengis.net/gml
Annotations
Specification of the scale factor by which a value using this unit of measure can be multiplied to obtain the corresponding value using the preferred unit of measure.
Diagram
Diagram
Type double
Properties
content: simple
Source
<element name="factor" type="double">
  <annotation>
    <documentation>Specification of the scale factor by which a value using this unit of measure can be multiplied to obtain the corresponding value using the preferred unit of measure.</documentation>
  </annotation>
</element>
Element gml:ConversionToPreferredUnitType / gml:formula
Namespace http://www.opengis.net/gml
Annotations
Specification of the formula by which a value using this unit of measure can be converted to obtain the corresponding value using the preferred unit of measure.
Diagram
Diagram index13.tmp#id2055 index13.tmp#id2056 index13.tmp#id2057 index13.tmp#id2058 index13.tmp#id2054
Type gml:FormulaType
Properties
content: complex
Model gml:a{0,1} , gml:b , gml:c , gml:d{0,1}
Children gml:a, gml:b, gml:c, gml:d
Instance
<gml:formula>
  <gml:a>{0,1}</gml:a>
  <gml:b>{1,1}</gml:b>
  <gml:c>{1,1}</gml:c>
  <gml:d>{0,1}</gml:d>
</gml:formula>
Source
<element name="formula" type="gml:FormulaType">
  <annotation>
    <documentation>Specification of the formula by which a value using this unit of measure can be converted to obtain the corresponding value using the preferred unit of measure.</documentation>
  </annotation>
</element>
Element gml:FormulaType / gml:a
Namespace http://www.opengis.net/gml
Diagram
Diagram
Type double
Properties
content: simple
minOccurs: 0
Source
<element name="a" type="double" minOccurs="0"/>
Element gml:FormulaType / gml:b
Namespace http://www.opengis.net/gml
Diagram
Diagram
Type double
Properties
content: simple
Source
<element name="b" type="double"/>
Element gml:FormulaType / gml:c
Namespace http://www.opengis.net/gml
Diagram
Diagram
Type double
Properties
content: simple
Source
<element name="c" type="double"/>
Element gml:FormulaType / gml:d
Namespace http://www.opengis.net/gml
Diagram
Diagram
Type double
Properties
content: simple
minOccurs: 0
Source
<element name="d" type="double" minOccurs="0"/>
Element gml:roughConversionToPreferredUnit
Namespace http://www.opengis.net/gml
Annotations
This element is included when the correct definition of this unit is unknown, but this unit has a rough or inaccurate conversion to the preferred unit for this quantity type.
Diagram
Diagram index13.tmp#id2032 index13.tmp#id2031 index13.tmp#id2052 index13.tmp#id2053 index13.tmp#id2051
Type gml:ConversionToPreferredUnitType
Type hierarchy
Properties
content: complex
Used by
Model gml:factor | gml:formula
Children gml:factor, gml:formula
Instance
<gml:roughConversionToPreferredUnit uom="">
  <gml:factor>{1,1}</gml:factor>
  <gml:formula>{1,1}</gml:formula>
</gml:roughConversionToPreferredUnit>
Attributes
QName Type Fixed Default Use Annotation
uom anyURI required
Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.
Source
<element name="roughConversionToPreferredUnit" type="gml:ConversionToPreferredUnitType">
  <annotation>
    <documentation>This element is included when the correct definition of this unit is unknown, but this unit has a rough or inaccurate conversion to the preferred unit for this quantity type.</documentation>
  </annotation>
</element>
Complex Type gml:UnitOfMeasureType
Namespace http://www.opengis.net/gml
Annotations
Reference to a unit of measure definition that applies to all the numerical values described by the element containing this element. Notice that a complexType which needs to include the uom attribute can do so by extending this complexType. Alternately, this complexType can be used as a pattern for a new complexType.
Diagram
Diagram index13.tmp#id2032
Used by
Model
Attributes
QName Type Fixed Default Use Annotation
uom anyURI required
Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.
Source
<complexType name="UnitOfMeasureType">
  <annotation>
    <documentation>Reference to a unit of measure definition that applies to all the numerical values described by the element containing this element. Notice that a complexType which needs to include the uom attribute can do so by extending this complexType. Alternately, this complexType can be used as a pattern for a new complexType.</documentation>
  </annotation>
  <sequence/>
  <attribute name="uom" type="anyURI" use="required">
    <annotation>
      <documentation>Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.</documentation>
    </annotation>
  </attribute>
</complexType>
Complex Type gml:UnitDefinitionType
Namespace http://www.opengis.net/gml
Annotations
Definition of a unit of measure (or uom). The definition includes a quantityType property, which indicates the phenomenon to which the units apply, and a catalogSymbol, which gives the short symbol used for this unit. This element is used when the relationship of this unit to other units or units systems is unknown.
Diagram
Diagram index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index1.tmp#id510 index1.tmp#id509 index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index19.tmp#id2039 index13.tmp#id2040 index13.tmp#id2041
Type extension of gml:DefinitionType
Type hierarchy
Used by
Model gml:metaDataProperty* , gml:description{0,1} , gml:name+ , gml:quantityType , gml:catalogSymbol{0,1}
Children gml:catalogSymbol, gml:description, gml:metaDataProperty, gml:name, gml:quantityType
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
Source
<complexType name="UnitDefinitionType">
  <annotation>
    <documentation>Definition of a unit of measure (or uom). The definition includes a quantityType property, which indicates the phenomenon to which the units apply, and a catalogSymbol, which gives the short symbol used for this unit. This element is used when the relationship of this unit to other units or units systems is unknown.</documentation>
  </annotation>
  <complexContent>
    <extension base="gml:DefinitionType">
      <sequence>
        <element ref="gml:quantityType"/>
        <element ref="gml:catalogSymbol" minOccurs="0"/>
      </sequence>
    </extension>
  </complexContent>
</complexType>
Complex Type gml:BaseUnitType
Namespace http://www.opengis.net/gml
Annotations
Definition of a unit of measure which is a base unit from the system of units. A base unit cannot be derived by combination of other base units within this system. Sometimes known as "fundamental unit".
Diagram
Diagram index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index1.tmp#id510 index1.tmp#id509 index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index19.tmp#id2039 index13.tmp#id2040 index13.tmp#id2041 index13.tmp#id2038 index13.tmp#id2043
Type extension of gml:UnitDefinitionType
Type hierarchy
Used by
Element gml:BaseUnit
Model gml:metaDataProperty* , gml:description{0,1} , gml:name+ , gml:quantityType , gml:catalogSymbol{0,1} , gml:unitsSystem
Children gml:catalogSymbol, gml:description, gml:metaDataProperty, gml:name, gml:quantityType, gml:unitsSystem
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
Source
<complexType name="BaseUnitType">
  <annotation>
    <documentation>Definition of a unit of measure which is a base unit from the system of units.  A base unit cannot be derived by combination of other base units within this system.  Sometimes known as "fundamental unit".</documentation>
  </annotation>
  <complexContent>
    <extension base="gml:UnitDefinitionType">
      <sequence>
        <element name="unitsSystem" type="gml:ReferenceType"/>
      </sequence>
    </extension>
  </complexContent>
</complexType>
Complex Type gml:DerivedUnitType
Namespace http://www.opengis.net/gml
Annotations
Definition of a unit of measure which is defined through algebraic combination of more primitive units, which are usually base units from a particular system of units. Derived units based directly on base units are usually preferred for quantities other than the base units or fundamental quantities within a system. If a derived unit is not the preferred unit, the ConventionalUnit element should be used instead.
Diagram
Diagram index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index1.tmp#id510 index1.tmp#id509 index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index19.tmp#id2039 index13.tmp#id2040 index13.tmp#id2041 index13.tmp#id2038 index13.tmp#id2046
Type extension of gml:UnitDefinitionType
Type hierarchy
Used by
Element gml:DerivedUnit
Model gml:metaDataProperty* , gml:description{0,1} , gml:name+ , gml:quantityType , gml:catalogSymbol{0,1} , gml:derivationUnitTerm+
Children gml:catalogSymbol, gml:derivationUnitTerm, gml:description, gml:metaDataProperty, gml:name, gml:quantityType
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
Source
<complexType name="DerivedUnitType">
  <annotation>
    <documentation>Definition of a unit of measure which is defined through algebraic combination of more primitive units, which are usually base units from a particular system of units. Derived units based directly on base units are usually preferred for quantities other than the base units or fundamental quantities within a system.  If a derived unit is not the preferred unit, the ConventionalUnit element should be used instead.</documentation>
  </annotation>
  <complexContent>
    <extension base="gml:UnitDefinitionType">
      <sequence>
        <element ref="gml:derivationUnitTerm" maxOccurs="unbounded"/>
      </sequence>
    </extension>
  </complexContent>
</complexType>
Complex Type gml:DerivationUnitTermType
Namespace http://www.opengis.net/gml
Annotations
Definition of one unit term for a derived unit of measure. This unit term references another unit of measure (uom) and provides an integer exponent applied to that unit in defining the compound unit. The exponent can be positive or negative, but not zero.
Diagram
Diagram index13.tmp#id2032 index13.tmp#id2031 index13.tmp#id2048
Type extension of gml:UnitOfMeasureType
Type hierarchy
Used by
Model
Attributes
QName Type Fixed Default Use Annotation
exponent integer optional
uom anyURI required
Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.
Source
<complexType name="DerivationUnitTermType">
  <annotation>
    <documentation>Definition of one unit term for a derived unit of measure. This unit term references another unit of measure (uom) and provides an integer exponent applied to that unit in defining the compound unit. The exponent can be positive or negative, but not zero.</documentation>
  </annotation>
  <complexContent>
    <extension base="gml:UnitOfMeasureType">
      <attribute name="exponent" type="integer"/>
    </extension>
  </complexContent>
</complexType>
Complex Type gml:ConventionalUnitType
Namespace http://www.opengis.net/gml
Annotations
Definition of a unit of measure which is related to a preferred unit for this quantity type through a conversion formula. A method for deriving this unit by algebraic combination of more primitive units, may also be provided.
Diagram
Diagram index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index1.tmp#id510 index1.tmp#id509 index1.tmp#id545 index1.tmp#id511 index1.tmp#id531 index1.tmp#id533 index19.tmp#id2039 index13.tmp#id2040 index13.tmp#id2041 index13.tmp#id2038 index13.tmp#id2050 index13.tmp#id2059 index13.tmp#id2046
Type extension of gml:UnitDefinitionType
Type hierarchy
Used by
Model gml:metaDataProperty* , gml:description{0,1} , gml:name+ , gml:quantityType , gml:catalogSymbol{0,1} , (gml:conversionToPreferredUnit | gml:roughConversionToPreferredUnit) , gml:derivationUnitTerm*
Children gml:catalogSymbol, gml:conversionToPreferredUnit, gml:derivationUnitTerm, gml:description, gml:metaDataProperty, gml:name, gml:quantityType, gml:roughConversionToPreferredUnit
Attributes
QName Type Fixed Default Use Annotation
gml:id ID required
Database handle for the object. It is of XML type ID, so is constrained to be unique in the XML document within which it occurs. An external identifier for the object in the form of a URI may be constructed using standard XML and XPointer methods. This is done by concatenating the URI for the document, a fragment separator, and the value of the id attribute.
Source
<complexType name="ConventionalUnitType">
  <annotation>
    <documentation>Definition of a unit of measure which is related to a preferred unit for this quantity type through a conversion formula.  A method for deriving this unit by algebraic combination of more primitive units, may also be provided.</documentation>
  </annotation>
  <complexContent>
    <extension base="gml:UnitDefinitionType">
      <sequence>
        <choice>
          <element ref="gml:conversionToPreferredUnit"/>
          <element ref="gml:roughConversionToPreferredUnit"/>
        </choice>
        <element ref="gml:derivationUnitTerm" minOccurs="0" maxOccurs="unbounded"/>
      </sequence>
    </extension>
  </complexContent>
</complexType>
Complex Type gml:ConversionToPreferredUnitType
Namespace http://www.opengis.net/gml
Annotations
Relation of a unit to the preferred unit for this quantity type, specified by an arithmetic conversion (scaling and/or offset). A preferred unit is either a base unit or a derived unit selected for all units of one quantity type. The mandatory attribute "uom" shall reference the preferred unit that this conversion applies to. The conversion is specified by one of two alternative elements: "factor" or "formula".
Diagram
Diagram index13.tmp#id2032 index13.tmp#id2031 index13.tmp#id2052 index13.tmp#id2053
Type extension of gml:UnitOfMeasureType
Type hierarchy
Used by
Model gml:factor | gml:formula
Children gml:factor, gml:formula
Attributes
QName Type Fixed Default Use Annotation
uom anyURI required
Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.
Source
<complexType name="ConversionToPreferredUnitType">
  <annotation>
    <documentation>Relation of a unit to the preferred unit for this quantity type, specified by an arithmetic conversion (scaling and/or offset). A preferred unit is either a base unit or a derived unit selected for all units of one quantity type. The mandatory attribute "uom" shall reference the preferred unit that this conversion applies to. The conversion is specified by one of two alternative elements: "factor" or "formula".</documentation>
  </annotation>
  <complexContent>
    <extension base="gml:UnitOfMeasureType">
      <choice>
        <element name="factor" type="double">
          <annotation>
            <documentation>Specification of the scale factor by which a value using this unit of measure can be multiplied to obtain the corresponding value using the preferred unit of measure.</documentation>
          </annotation>
        </element>
        <element name="formula" type="gml:FormulaType">
          <annotation>
            <documentation>Specification of the formula by which a value using this unit of measure can be converted to obtain the corresponding value using the preferred unit of measure.</documentation>
          </annotation>
        </element>
      </choice>
    </extension>
  </complexContent>
</complexType>
Complex Type gml:FormulaType
Namespace http://www.opengis.net/gml
Annotations
Paremeters of a simple formula by which a value using this unit of measure can be converted to the corresponding value using the preferred unit of measure. The formula element contains elements a, b, c and d, whose values use the XML Schema type "double". These values are used in the formula y = (a + bx) / (c + dx), where x is a value using this unit, and y is the corresponding value using the preferred unit. The elements a and d are optional, and if values are not provided, those parameters are considered to be zero. If values are not provided for both a and d, the formula is equivalent to a fraction with numerator and denominator parameters.
Diagram
Diagram index13.tmp#id2055 index13.tmp#id2056 index13.tmp#id2057 index13.tmp#id2058
Used by
Model gml:a{0,1} , gml:b , gml:c , gml:d{0,1}
Children gml:a, gml:b, gml:c, gml:d
Source
<complexType name="FormulaType">
  <annotation>
    <documentation>Paremeters of a simple formula by which a value using this unit of measure can be converted to the corresponding value using the preferred unit of measure. The formula element contains elements a, b, c and d, whose values use the XML Schema type "double". These values are used in the formula y = (a + bx) / (c + dx), where x is a value using this unit, and y is the corresponding value using the preferred unit. The elements a and d are optional, and if values are not provided, those parameters are considered to be zero. If values are not provided for both a and d, the formula is equivalent to a fraction with numerator and denominator parameters.</documentation>
  </annotation>
  <sequence>
    <element name="a" type="double" minOccurs="0"/>
    <element name="b" type="double"/>
    <element name="c" type="double"/>
    <element name="d" type="double" minOccurs="0"/>
  </sequence>
</complexType>
Attribute gml:UnitOfMeasureType / @uom
Namespace No namespace
Annotations
Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.
Type anyURI
Properties
use: required
Used by
Complex Type gml:UnitOfMeasureType
Source
<attribute name="uom" type="anyURI" use="required">
  <annotation>
    <documentation>Reference to a unit of measure definition, usually within the same XML document but possibly outside the XML document which contains this reference. For a reference within the same XML document, the "#" symbol should be used, followed by a text abbreviation of the unit name. However, the "#" symbol may be optional, and still may be interpreted as a reference.</documentation>
  </annotation>
</attribute>
Attribute gml:DerivationUnitTermType / @exponent
Namespace No namespace
Type integer
Properties
content: simple
Used by
Source
<attribute name="exponent" type="integer"/>